DeVille DTS V8-4.6L VIN 9 (2002)
1. Install the left temperature actuator.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the left air temperature retaining screws (1).
Tighten
Tighten the screws to 1.4 N.m (12 lb in).
3. Install the electrical connector to the left air temperature actuator.
4. Install the left side sound insulator.
5. Recalibrate the actuators. Refer to Body Control Module (BCM) Programming/RPO Configuration (DIM) or Body Control Module (BCM)
Programming/RPO Configuration (IPM) or Body Control Module (BCM) Programming/RPO Configuration (RIM) in Body Control System.
