DeVille DTS V8-4.6L VIN 9 (2002)
2. Install the recirculation actuator retaining fasteners (1).
Tighten
Tighten the screws to 1.4 N.m (12 lb in).
3. Install the electrical connector to the recirculation actuator.
4. Position the DIM module bracket to its original position.
5. Install the rear two DIM module bracket retaining screws.
Tighten
Tighten the screws to 1.4 N.m (12 lb in).
6. Install the DIM module into the bracket.
7. Install the right sound insulator.
8. Install the IP compartment.
9. Recalibrate the actuators. Refer to Body Control Module (BCM) Programming/RPO Configuration (DIM) or Body Control Module (BCM)
Programming/RPO Configuration (IPM) or Body Control Module (BCM) Programming/RPO Configuration (RIM) in Body Control System.