DeVille DTS V8-4.6L VIN 9 (2002)
Brake Light Switch: Service and Repair
Park Brake
Park Brake Warning Lamp Switch Replacement
Removal Procedure
1. Remove the left closeout/insulator.
2. Remove the left knee bolster.
3. Remove the left front carpet retainer.
4. Remove the park brake pedal assembly mounting nuts (1, 2).
5. Position the park brake pedal assembly away from the mounting studs.
6. Disconnect the electrical connector from the park brake warning lamp switch.
7. Remove park brake warning lamp switch mounting bolt.
8. Remove park brake warning lamp switch.
Installation Procedure