DeVille DTS V8-4.6L VIN 9 (2002)
4. Disconnect the low temperature sensor electrical connector.
5. Remove the evaporator hose nut (1).
6. Disconnect the evaporator hose assembly (2) from the evaporator core.
7. Remove the upper filler panel.
8. Remove the nut (1) retaining the evaporator hose assembly (3) to the condenser.
9. Disconnect the evaporator hose assembly (3) from the condenser.
10. Remove the evaporator hose assembly.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Inspect the seal washers for damage.
Replace the seal washers that are damaged.
The sealing washers do not require lubrication.
