DeVille DTS V8-4.6L VIN 9 (2002)
3. Remove the Connector Position Assurance (CPA) (1) from the inflatable restraint sensing and diagnostic module (SDM) wiring harness connector
(2).
4. Push down flex lock button (3) and then move sliding connector locking cover (4) to the open position.
IMPORTANT: The inflatable restraint sensing diagnostic module (SDM) is shown with the carpet removed for illustration purposes only. Removal
of the front carpet and/or the front seats is not necessary to service the SDM
5. Remove push-on clip (1) securing SDM wiring harness to console stud.
6. Disconnect the SDM wiring harness connector (3) from the SDM (2).
