DeVille DTS V8-4.6L VIN 9 (2002)
Suspension Control Module: Service and Repair
Electronic Suspension Control Module Calibration
Electronic Suspension Control Module Calibration
Important:
^
New Electronic Suspension Control Modules must be calibrated after installation. DTC C0563 is stored in the memory of new Electronic
Suspension Control Modules and will not clear until the module is calibrated.
^
The scan tool must have the latest version chassis application program.
1. Connect the scan tool to the Data Link Connector (DLC).
2. Turn the ignition ON with the engine off.
3. Proceed per the instructions on the scan tool readout.
4. Perform the Trim Height Adjustment.
