DeVille DTS V8-4.6L VIN 9 (2002)
7. Remove the side impact inflator module (1) from the seat (2).
8. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required
retention period. Refer to Inflator Module Handling and Scrapping.
9. Remove the connector position assurance (CPA) (4) from the electrical connector (5) on the side impact inflator module.
10. Disconnect the electrical connector (5) from side impact inflator module (1).
INSTALLATION PROCEDURE
IMPORTANT: After a deployment or replacement of the inflatable restraint side impact module, the module retainer (6) must be replaced in order to
insure proper inflator module positioning.
