DeVille DTS V8-4.6L VIN 9 (2002)
1. Install a new retainer (6) to the side impact inflator module (1).
2. Connect the electrical connector (5) to the side impact inflator module (1).
3. Install the CPA (4) to the electrical connector (5) of the side impact inflator module.
4. Install the side impact inflator module (1) to the seat (2).
NOTE: Refer to Fastener Notice in Service Precautions.
5. Install the two fasteners (1) to the side impact inflator module.
Tighten
Tighten the fasteners to 9 N.m (80 lb in).