DeVille DTS V8-4.6L VIN 9 (2002)
Knee Diverter: Service and Repair
Knee Bolster Replacement - Right
REMOVAL PROCEDURE
IMPORTANT: The knee bolster trim panel must be replaced, not repaired, if there is any visible damage.
1. Remove the knee bolster trim panel (1) by grasping at the top and the bottom and by pulling rearward.
2. Remove the knee bolster from the vehicle.
INSTALLATION PROCEDURE
1. Align the knee bolster trim (1) alignment pins to the lower IP.
2. Push forward firmly in order to engage the clips onto the IP retainer.
