DeVille DTS V8-4.6L VIN 9 (2002)
Ambient Temperature Sensor / Switch HVAC: Service and Repair
Air Temperature Sensor Replacement - Auxiliary
REMOVAL PROCEDURE
1. Remove the left console trim panel.
2. Locate the auxiliary air temperature sensor, located below the auxiliary blower motor on the auxiliary blower motor assembly (2).
3. Grasp the sensor and rotate the sensor ¼ turn in order to release the sensor from the auxiliary blower motor assembly.
4. Remove the sensor from the auxiliary blower motor assembly.
5. Disconnect the electrical connector (1) from the auxiliary temperature sensor (2) and remove the auxiliary air temperature sensor.
INSTALLATION PROCEDURE
1. Connect the auxiliary air temperature sensor (2) to the temperature sensor connector (1).
2. Install the sensor in the auxiliary blower motor assembly, rotate the sensor 1/4 turn in order to secure the sensor (2) in the duct.
3. Install the left console trim panel.
