DeVille DTS V8-4.6L VIN 9 (2002)
6. Reposition the protective boot from the generator output BAT terminal for access.
7. Remove the generator output BAT terminal nut and disconnect the positive lead from the generator.
8. Disconnect the cable harness clips from the front of the camshaft cover.
9. Remove the generator cable from the vehicle.
INSTALLATION PROCEDURE
1. Position the generator cable to the engine.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Connect the battery positive lead and install the generator output BAT terminal nut.
Tighten
Tighten the generator output BAT terminal nut to 12.5 N.m (111 lb in).
3. Press the protective boot on to the generator output BAT terminal.
4. Connect the cable harness clips to the front of the camshaft cover.