DeVille DTS V8-4.6L VIN 9 (2002)
6. Install the power steering pressure and return hoses to the power steering gear.
^
Tighten the power steering pressure and return hoses to 27 Nm (20 ft. lbs.).
7. Remove the drain pan from under the vehicle.
8. Connect the variable effort steering electrical connector.
9. Install the power steering gear heat shield.
10. Install the outer tie rods to the steering knuckles.
11. Install the outer tie rods retaining nuts.
^
Tighten the outer tie rod retaining nut (2) to 47 Nm (35 ft. lbs.).
^
Tighten the outer tie rod retaining nut (2) up to 1/6 additional turn, or 70 Nm (52 ft. lbs.) maximum.
12. Install the intermediate shaft to the steering gear.
13. Install the intermediate shaft pinch bolt.
^
Tighten the intermediate shaft pinch bolt to 45 Nm (33 ft. lbs.).
