DeVille DTS V8-4.6L VIN 9 (2002)
9. Remove the hub and bearing retaining bolts.
10. Use J28733-B in order to remove the hub and drive axle.
11. Use J24319-B in order to separate the tie rod (1) from the steering knuckle (2).
12. Using J 39549 separate the ball joint from the lower control arm.
13. Remove the strut to knuckle attaching nuts and bolts.
14. Remove the steering knuckle.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
