DeVille DTS V8-4.6L VIN 9 (2002)
2. Connect the air hose to the air compressor at 2 places.
3. Install the air dryer on the air compressor.
4. Install the heat shield on the air compressor bracket with three bolts (Do not install the fourth heat shield bolt. It must be installed after the air tube
is connected).
^
Tighten the bolts to 4 Nm (35 inch lbs.).
5. Install the air compressor connector to the connector anchor.
6. Install the air compressor assembly on the vehicle with 2 nuts and 2 bolts.
^
Tighten the bolts to 9 Nm (80 inch lbs.).
^
Tighten the two nuts to 9 Nm (80 inch lbs.).
7. Connect the harness connector to the air compressor connector.
8. Install the intake air filter on the vehicle.