DeVille DTS V8-4.6L VIN 9 (2002)
5. Install new strut to steering knuckle bolts and nuts.
^
Tighten the strut to steering knuckle bolts and nuts to 147 Nm (108 ft. lbs.).
6. Install the brake line bracket and mounting bolt to the strut.
^
Tighten the strut to steering knuckle bolts and nuts to 17 Nm (13 ft. lbs.).
7. Install the wheel speed sensor bracket and mounting bolt to strut.
^
Tighten the wheel speed sensor bracket retaining bolt to 17 Nm (13 ft. lbs.).
8. Install the wheel speed sensor bracket to strut.
9. Install the wheel speed sensor wiring harness to the bracket.
10. Install the wheel and tire.
11. Lower the vehicle.
With RPO FE7
Strut Assembly Replacement (FE7)
Removal Procedure
Notice: Care should be taken to avoid chipping or scratching the coating when handling the suspension coil spring. Damage to the coating can cause
premature failure.
