DeVille DTS V8-4.6L VIN 9 (2002)
2. Install the brake shield.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the washer and wheel bearing nut.
^
Tighten the wheel bearing nut to 200 Nm (147 ft. lbs.).
4. Clean the lower control arm face and bore before installing the wheel bearing and hub.
5. Install the wheel bearing and hub to the lower control arm with the retaining bolts (1).
^
Tighten the wheel bearing and hub retaining bolts to 118 Nm (87 ft. lbs.).
6. Install a new ABS wheel speed sensor reluctor ring.
7. Install a new ABS sensor.
8. Install the brake rotor.
9. Install the ABS sensor wire connector.
10. Install the wheel and tire.
11. Lower the vehicle.
