DeVille DTS V8-4.6L VIN 9 (2002)
Torque Converter Clutch Solenoid: Service and Repair
4. Oil Pump, Upper Control Valve Assembly Removal
1. Using a small screwdriver, disconnect the following parts:
-
The electrical connector from the automatic transmission fluid temperature sensor (350)
-
The torque converter clutch solenoid valve (336)
-
The pressure control solenoid valve (339)
2. Remove the 19 8-mm bolts (229, 231, 232, 233, 234, 235, 331) from the pump housings.
3. Remove the scavenge, the primary and the secondary pump assemblies as one unit (200-225).
4. Remove the pump gasket (228).
