DeVille DTS V8-4.6L VIN 9 (2002)
41. Remove the nut (1) securing the left transaxle mount to the left transaxle mount bracket.
42. Remove the remaining transaxle to engine bolt (2).
43. Separate the transaxle from the engine.
44. Tilt the transaxle using the support jack enough to allow clearance for the starter nose cone.
Important: Ensure clearance is maintained between the transaxle and the following:
^
The brake pipes
^
The secondary AIR pipe
^
The power steering pressure hose
^
The wiring harnesses
45. Carefully lower the transaxle from the vehicle.
46. Complete the following if transaxle replacement is necessary:
^
Remove the transaxle cooler pipe,
^
Remove the left transaxle bracket.
^
Remove the rear transaxle bracket.
Installation Procedure
