DeVille DTS V8-4.6L VIN 9 (2002)
2. Install the scavenge tube seal into the case.
3. Install the scavenge tube into the scavenge tube seals located in the case and in the driven sprocket support. Tap the scavenge tube lightly with a
plastic hammer to ensure a tight fit in both seals.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the scavenge tube bolt.
^
Tighten the bolt to 8 - 14 Nm (6 - 10 ft. lbs.).
5. Inspect the case to case extension seal (126).
6. Inspect the case extension mating surface for damage.
7. Install the following parts:
^
The selective washer (133)
^
The thrust washer (132)
^
The case extension seal (126)
^
The case extension (134)