DeVille DTS V8-4.6L VIN 9 (2002)
8. Reposition the main wiring harness to gain access to the upper transaxle to engine bolts (1).
9. Remove the transaxle to engine bolts (1). The remaining bolt (2) will temporally retain the transaxle and will be removed from the underside of the
vehicle.
10. Place a drain pan under the vehicle.
11. Remove the upper transaxle oil cooler pipe retaining bolt from the radiator fan shroud.
12. Disconnect the upper transaxle oil cooler pipe from the radiator using the J41623-B. Install plugs in the oil cooler pipe and the radiator to prevent
fluid loss and contamination.
13. Disconnect the lower transaxle oil cooler pipe from the transaxle and Install plugs in the oil cooler pipe and the transaxle, to prevent fluid loss and
contamination.
14. Disconnect the transaxle vent tube from the accelerator bracket.
15. Install the engine support fixture.
16. Raise and support the vehicle. Refer to Vehicle Lifting.
