DeVille DTS V8-4.6L VIN 9 (2002)
Torque Converter Cover: Service and Repair
Torque Converter Cover Replacement
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the attaching bolts and the engine-to-transmission brace.
3. Remove the torque converter cover.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the torque converter cover.
^
Tighten the cover bolt to 12 Nm (106 inch lbs.).
2. Install the engine-to-transmission brace and attaching bolts.
^
Tighten the bolts to 47 Nm (35 ft. lbs.).
3. Lower the vehicle.
