DeVille DTS V8-4.6L VIN 9 (2002)
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the transmission mount bracket mounting bolts (3) and nut (2).
^
Tighten the bolts and nut to 50 Nm (37 ft. lbs.).
3. Raise the engine and transmission assembly into position.
4. Install the nut (1) to the mount and mount bracket.
^
Tighten the mount nut to 75 Nm (55 ft. lbs.).
5. Remove the engine assembly support jack.
6. Lower the vehicle.