DeVille DTS V8-4.6L VIN 9 (2002)
Wheel Bearing: Service and Repair
Rear Suspension
With RPO FE1 and FE3
Wheel Bearing/Hub Replacement- Rear (FE1, FE3)
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the brake rotor.
4. Disconnect the ABS sensor wire connector.
5. Remove the wheel bearing and hub retainer bolts.
6. Remove the wheel bearing and hub and brake shield.
Installation Procedure