Eldorado V8-4.6L VIN 9 (1995)
30.
Connect the vacuum manifold to the intake manifold adapter.
31.
Connect the negative battery cable.
32.
Tighten the negative cable bolt at the battery.
Tighten the negative cable bolt to 15 Nm (11 lb ft).
33.
Check for fuel leaks.
A.
Turn the ignition switch ON for 2 seconds.
B.
Turn the ignition switch OFF for 10 seconds.
C.
Turn the ignition switch ON.
D.
Check for fuel leaks.
E.
Start the vehicle and allow engine to reach operating temperature while observing for fuel leaks.
