Eldorado V8-4.6L VIN Y (1994)
Tools Required
J 38778 Door Trim Pad Clip Remover For Map Pocket
Retainer ONLY
Removal Procedure
1.
Remove the power window switch assembly (3).
1.1.
Place protective tape between the forward edge of the power window switch assembly and the door trim panel (5).
Important:
In order to avoid damage, the retention spring clip must be fully disengaged prior to removal of the power window switch assembly.
1.2
Between the forward edge of the power window switch assembly and the door trim panel (5), carefully insert a plastic trim tool far enough
to depress and disengage the switch plate retention spring clip.
1.3.
Use the plastic trim tool in one hand to gently pry the forward edge of the power window switch assembly upward. Use the other hand to
grasp and pull the switch assembly from the door trim panel.
1.4.
Disconnect the electrical connectors (4).
