Eldorado Touring V8-4.6L VIN 9 (1998)
Air Door Actuator / Motor: Adjustments
Driver Temperature Valve Link Adjustment
1. Start vehicle.
2. Set temperature to 32°C (90°F) at heater and A/C control.
3. Set passenger temperature control to full warm.
^
If outside temperature above 32°C (90°F), disconnect inside temperature sensor.
^
Allow 45 seconds for air mix valve actuators to move to warm position.
4. Gently pull driver temperature valve link toward programmer until valve hits stop.
5. Push threaded portion of link into slot of driver temperature valve crank.
