Eldorado Touring V8-4.6L VIN 9 (1998)
Torque Converter Cover: Service and Repair
REMOVAL PROCEDURE
1. Raise the vehicle. Refer to Vehicle Lifting Points.
2. Support the vehicle on safety stands.
3. Remove the attaching bolts and the engine-to-transmission brace.
4. Remove the torque converter cover.
INSTALLATION PROCEDURE
1. Install the torque converter cover.
^
Tighten the cover bolt to 12 Nm (106 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the engine-to-transmission brace and attaching bolts.
^
Tighten the bolts to 47 Nm (35 ft. lbs.).
3. Remove the safety stands.
4. Lower the vehicle.