Escalade ESV RWD V8-6.2L (2010)
Note: Mark the position of the brake pads for proper installation.
10. Remove the brake pads from the brake caliper bracket.
11. Remove the brake pad retaining springs.
12. Remove the guide pins (5) from brake caliper bracket (3).
13. Remove the guide pin boots (4) from the caliper bracket.
Installation Procedure
1. Lubricate the caliper bracket bushings and guide pins with high temperature silicone brake lubricant.
2. Install the guide pin boots (4) to the brake caliper bracket.
3. Install the guide pins (5) to the brake caliper bracket (3).
