Escalade ESV RWD V8-6.2L (2010)
DO NOT allow the open end wrench to come in contact with the brake caliper. Allowing the open end wrench to come in contact with the
brake caliper will cause a pulsation when the brake is applied.
7. Using an open end wrench to hold the guide pin, loosen the guide pin bolt.
8. Remove the brake caliper guide pin bolts.
Caution: Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible
brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which
may cause damage to the brake hose and in turn may cause a brake fluid leak.
9. Remove the caliper from the caliper bracket and support with heavy mechanics wire or equivalent.
