Escalade ESV RWD V8-6.2L (2010)
6. Install the radiator vent inlet hose (2) to the coolant air bleed pipe fitting.
7. Position the radiator vent inlet hose clamp (1) at the coolant air bleed pipe fitting.
8. Install the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement (See: Engine/Tune-up and Engine Performance
Checks/Air Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Resonator Outlet Duct Replacement).
9. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill) (See: Service and Repair/Cooling System Draining and Filling
(Static Fill)).
10. If the rear coolant air bleed covers were replaced, install the intake manifold. Refer to Intake Manifold Replacement (Without AFM) (See:
Engine/Intake Manifold/Service and Repair)Intake Manifold Replacement (With AFM) (See: Engine/Intake Manifold/Service and Repair).
