cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

ABOUT US
Coolant Heater Replacement (With LC9, L76,or L92)|Page 2677 > < Coolant Heater Replacement (With LC9, L76,or L92)|Page 2675

Escalade ESV RWD V8-6.2L (2010)

Page 3
background image

5. Raise the vehicle.
6. Install the coolant heater cord clip (6) to the front brake front pipe.
7. Position the coolant heater cord clip to the frame and install the coolant heater cord retainer (5).

8. Connect the coolant heater cord electrical connector.

9. If equipped, position and install the oil pan skid plate and bolts and tighten to 20 Nm (15 lb ft).

10. Lower the vehicle.

Coolant Heater Replacement (With LC9, L76,or L92)|Page 2677 > < Coolant Heater Replacement (With LC9, L76,or L92)|Page 2675