cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Engine Oil Cooler Connector Replacement (Radiator)|Page 2881 > < Engine Oil Cooler Connector Replacement (Radiator)|Page 2879
Page 1
background image

Oil Cooler: Service and Repair
Engine Oil Cooler Hose/Pipe Replacement

Engine Oil Cooler Hose/Pipe Replacement

Removal Procedure

The optional oil cooler is either an integral part of the radiator or a separate unit placed in front of the radiator. The cooler lines and hoses are
serviceable.

1. Disconnect the engine oil cooler quick connect fittings. Refer to Engine Oil Cooler Hose/Pipe Quick-Connect Fitting Disconnection and

Connection   (See: Engine Oil Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection).

2. If equipped with regular production option (RPO) L76 (6.0L) engine, perform the following.

1. Open the oil cooler hose clip located on the lower fan shroud.
2. Remove the oil cooler hoses from the clip.

3. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle   (See: Maintenance/Vehicle Lifting/Service and Repair).

Engine Oil Cooler Connector Replacement (Radiator)|Page 2881 > < Engine Oil Cooler Connector Replacement (Radiator)|Page 2879