Escalade ESV RWD V8-6.2L (2010)
15. If equipped with RPO L76 (6.0L) engine, perform the following:
1. Lower the differential carrier.
2. Remove the oil cooler hose adapter bolts (2).
3. Remove the oil cooler hose assembly and gasket. Discard the gasket.
4. Inspect the fittings, connectors, and cooler hoses for damage or distortion.
16. If equipped with RPO LY6 (6.0L) engine, perform the following:
1. Remove the oil cooler hose bracket bolt. (1)
2. Remove the oil cooler hose adapter bolts. (2)
3. Remove the oil cooler hose assembly. Discard the gasket.
4. Inspect the fittings, connectors, and cooler hoses for damage or distortion.
Installation Procedure
