Escalade ESV RWD V8-6.2L (2010)
Ignition Cable: Service and Repair
Spark Plug Wire Replacement
Removal Procedure
1. Remove the spark plug wire from the spark plug.
1. Twist the spark plug wire boot a 1/2 turn.
2. Pull only on the boot in order to remove the wire from the spark plug.
2. Remove the spark plug wire from the ignition coil.
1. Twist the spark plug wire boot a 1/2 turn.
2. Pull only on the boot in order to remove the wire from the ignition coil.
Installation Procedure
