Escalade ESV RWD V8-6.2L (2010)
Exhaust Pipe/Muffler Hanger: Service and Repair
Exhaust Muffler Insulator, Hanger, and Bracket Replacement (With 1500 and LC9, LMG, LY5 or
L76)
Exhaust Muffler Insulator, Hanger, and Bracket Replacement (With 1500 and LC9, LMG, LY5 or L76)
Removal Procedure
Warning: Refer to Protective Goggles and Glove Warning (See: Service Precautions/Technician Safety Information/Protective Goggles and Glove
Warning).
Warning: Refer to Exhaust Service Warning (See: Service Precautions).
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
Note:
*
Service the exhaust system insulators individually in order to retain the support for the exhaust system.
*
Do not use oil base lubricants.
Note: Do not use oil base lubricants.
2. Apply a soapy solution to the following in order to ease the removal of the hanger (1):
*
The frame support bracket rod (2)
*
The exhaust pipe hanger rod (3)
3. Pry the exhaust pipe hanger (1) free from the following:
*
The frame support bracket rod (2)
*
The exhaust pipe hanger rod (3)
Installation Procedure
