cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Procedures|Page 11987 > < Procedures|Page 11985
Page 1
background image

Hose/Line HVAC: Removal and Replacement

Auxiliary Air Conditioning Evaporator Tube Replacement

Auxiliary Air Conditioning Evaporator Tube Replacement

Special Tools 

J 39400-A  Halogen Leak Detector

Removal Procedure

1. Recover the refrigerant from the system. Refer to Refrigerant Recovery and Recharging (HP2)   (See: Service and Repair/Refrigerant Recovery

and Recharging (HP2))Refrigerant Recovery and Recharging (Non-HP2)   (See: Refrigerant/Service and Repair).

2. Remove the auxiliary A/C evaporator tubes (3) from the condenser tube (2) and the accumulator (5).
3. Loosen the right front wheelhouse to gain access to the clamp behind the wheelhouse.
4. Raise the vehicle. Refer to Lifting and Jacking the Vehicle   (See: Maintenance/Vehicle Lifting/Service and Repair).
5. Remove the right assist step. Refer to Assist Step Replacement (Z71)   (See: Body and Frame/Auxiliary Step / Running Board/Service and

Repair/Assist Step Replacement (Z71))Assist Step Replacement (Power BRS)   (See: Body and Frame/Auxiliary Step / Running Board/Service
and Repair/Assist Step Replacement (Power BRS))Assist Step Replacement (Chevrolet HP2)   ()Assist Step Replacement (GMC Denali XL)   (
See: Body and Frame/Auxiliary Step / Running Board/Service and Repair/Assist Step Replacement (GMC Denali XL)).

6. Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Right Side   (See: Body and Frame/Fender/Front

Fender/Front Fender Liner/Service and Repair/Front Wheelhouse Liner Replacement - Right Side).

7. Remove the rear wheelhouse liner. Refer to Rear Wheelhouse Panel Liner Replacement (RPO HP2)   ()Rear Wheelhouse Panel Liner Replacement

(RPO X88 Chevrolet, RPO O88 GMC)   (See: Body and Frame/Fender/Rear Fender/Rear Fender Liner/Service and Repair/Rear Wheelhouse
Panel Liner Replacement (RPO X88 Chevrolet, RPO O88 GMC)).

8. Remove the retaining nut (2) and the auxiliary A/C evaporator tubes (3) from the auxiliary HVAC module.

Procedures|Page 11987 > < Procedures|Page 11985