Escalade ESV RWD V8-6.2L (2010)
2. Install the auxiliary heater pipes (2) to the clamps (5).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the heater/A/C tubes retaining nut (4) to the stud (1) at the frame (6) and tighten to 7 Nm (62 lb in).
4. Install the auxiliary heater pipes (2, 3) to the auxiliary heater core.
5. Install the right front wheelhouse panel. Refer to Front Wheelhouse Liner Replacement - Right Side (See: Body and Frame/Fender/Front
Fender/Front Fender Liner/Service and Repair/Front Wheelhouse Liner Replacement - Right Side).
6. Install the right rear wheelhouse panel. Refer to Rear Wheelhouse Panel Liner Replacement (RPO HP2) ()Rear Wheelhouse Panel Liner
Replacement (RPO X88 Chevrolet, RPO O88 GMC) (See: Body and Frame/Fender/Rear Fender/Rear Fender Liner/Service and Repair/Rear
Wheelhouse Panel Liner Replacement (RPO X88 Chevrolet, RPO O88 GMC)).
7. Install the vehicle right assist step. Refer to Assist Step Replacement (Z71) (See: Body and Frame/Auxiliary Step / Running Board/Service and
Repair/Assist Step Replacement (Z71))Assist Step Replacement (Power BRS) (See: Body and Frame/Auxiliary Step / Running Board/Service
and Repair/Assist Step Replacement (Power BRS))Assist Step Replacement (Chevrolet HP2) ()Assist Step Replacement (GMC Denali XL) (
See: Body and Frame/Auxiliary Step / Running Board/Service and Repair/Assist Step Replacement (GMC Denali XL)).
8. Install the auxiliary heater pipes (1, 2) to the heater inlet and outlet tees (3, 4).
9. Connect the outlet heater hose to the heater core.
10. Connect the inlet heater hose to the heater core.
