Escalade ESV RWD V8-6.2L (2010)
Positive: Service and Repair
Battery Positive Cable Replacement (without TP2)
Battery Positive Cable Replacement (without TP2)
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Negative/Service and Repair/Battery
Negative Cable Disconnection and Connection).
2. Remove the underhood fuse block cover (1).
3. Lift the fuse block retainers (2) from the locked position and rotate the retainers to the open position.
4. Reposition the fuse block and remove the battery positive connector (3) from the underhood fuse block base.
5. Remove the battery positive cable retainers (1) from the studs on the plenum front panel.