Escalade ESV RWD V8-6.2L (2010)
1. Install the positive battery cable to the vehicle.
2. Install the positive battery cable clips (1) onto the studs on the plenum front panel.
3. Install the positive battery cable clip (1) onto the stud on the plenum front panel.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the positive battery cable clip nuts (2) to the studs on the plenum front panel and tighten to 3 Nm (27 lb in).