Escalade ESV RWD V8-6.2L (2010)
10. Ensure that the junction block retainers are in the open position (1).
11. Position and align the junction block to the 4 bracket pivots (2), once the pivots are engaged, push the retainers down into the locked position (3).
12. Install the underhood junction block cover.
13. Install the upper intake manifold sight shield. Refer to Upper Intake Manifold Sight Shield Replacement (See: Engine, Cooling and
Exhaust/Engine/Intake Manifold/Service and Repair/Upper Intake Manifold Sight Shield Replacement).
14. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Negative/Service and Repair/Battery
Negative Cable Disconnection and Connection).
