Escalade ESV RWD V8-6.2L (2010)
7. Install the engine wiring harness lead terminal (2) to the starter.
8. Install the engine wiring harness lead nut (3).
Tighten the lead nut to 3.4 Nm (30 lb in).
9. Position the starter into place.
10. Install the starter bolts.
Tighten the starter bolts to 50 Nm (37 lb ft).
11. Install the right front wheel and tire. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
12. Raise the vehicle.