Escalade V8-5.7L VIN R (2000)
Front Door Hinge: Service and Repair
Door Hinge Roller Pin Replacement
Door Hinge Roller Pin Replacement
Removal Procedure
Tools Required
J 36604 Door Hinge Spring Compressor
Caution: Before removing the spring, cover the spring with a towel to prevent the spring from flying and possibly causing damage or
personal injury.
1. Remove the door hinge spring using the J 36604.
2. Remove the C-clips that retain the door hinge roller pins.
3. Support the door in the open position.
4. Remove the door hinge roller pins from the vehicle.
Use a soft-faced hammer and locking pliers in order to remove the hinge pins.
5. Position the door away from the hinge.
Remove and discard the old bushings.
Installation Procedure
1. Install the new bushings and position the door on the hinges.