Escalade V8-5.7L VIN R (2000)
4. Remove the trim panel armrest screws.
5. Using the J 38778, carefully pry the retainers from the retainer seats.
Remove the trim panel from the door.
6. Disconnect the following components:
*
The courtesy light connector, as necessary
*
The power window switch connector, as necessary
*
The speaker wiring, as necessary
7. Remove the courtesy lamp lens.
8. Remove the power window switch, as necessary.
Installation Procedure
1. Install the retainers to the trim panel.
2. Install the power window switch, as necessary.
3. Install the courtesy lamp lens or the reflector, as necessary.
4. Install the speaker, as necessary.
5. Connect the following components:
*
The courtesy light connector, as necessary
*
The power window switch connector, as necessary
*
The speaker wiring, as necessary
6. Align the retainers with the holes in the door.
7. Install the trim panel to the door by applying pressure in order to seat the retainers.
8. Install the window regulator handle, as necessary.
Notice: Refer to Fastener Notice in Service Precautions.
9. Install the trim panel armrest screws.
Tighten the trim panel armrest screws to 2 N.m (18 lb in).
10. Install the door handle bezel.
