Escalade V8-5.7L VIN R (2000)
Rear Door Striker: Service and Repair
Door Striker Replacement - Body Mounted Rear
Door Striker Replacement - Body Mounted Rear
Removal Procedure
1. Mark the position of the upper striker and/or the lower striker.
2. Remove the striker screw.
3. Remove the striker.
Installation Procedure
1. Install the striker to the vehicle.
2. Install the striker screw.
Notice: Refer to Fastener Notice in Service Precautions.
3. Align the striker and the screw with the mark made during the removal.
Tighten the screw to 8 N.m (75 lb in).