Escalade V8-5.7L VIN R (2000)
1. Install the jack and tool stowage tray.
2. Install the jack and tools into the stowage tray.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the jack and tool stowage tray cover and nut.
Tighten the nut to retain the jack and tool stowage tray cover to 5 N.m (44 lb in).
MAP Pocket Trim Panel Replacement
REMOVAL PROCEDURE
TOOLS REQUIRED
J 38778 Trim Panel Remover
1. Remove the trim panel.
2. Pry the retainers from the trim panel using the J 38778.
3. Remove the map pocket from the trim panel.