Escalade V8-5.7L VIN R (2000)
Installation Procedure
1. Install the lower rear quarter trim panel to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the lower rear quarter trim panel screws.
Tighten the screws to 6 N.m (53 lb in).
3. Install the pocket of the lower panel, if equipped.
Rear Quarter Trim Panel Replacement (Crew Cab)
Rear Quarter Trim Panel Replacement (Crew Cab)
Removal Procedure
1. Remove the coat hook.
2. Remove the seat belt.
3. Remove the jack cover, the jack, the jack tray on the right side.
4. Remove the rear window lower garnish molding.
5. Remove the quarter panel trim screws, pickup and extended cab only.
6. Remove the rear screws from the sill trim plate, pickup and crew cab only.
7. Remove the rear quarter trim panel (1).
Installation Procedure
