Escalade V8-5.7L VIN R (2000)
1. Remove the seat from the vehicle.
2. Remove the armrest.
3. Open the access flaps at the lower rear corners of the seat back in order to allow access to the seat back to the frame retaining bolts.
4. Remove the bolts from the seat back frame (5).
5. Remove the seat back frame from the seat back cushion frame.
Installation Procedure
1. Install the seat back frame to the seat cushion frame.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts to retain the seat back frame (5) to the seat cushion frame.
Tighten the bolts to retain the seat back frame to the seat cushion frame to 35 N.m (26 lb ft).