Escalade V8-5.7L VIN R (2000)
1. Remove the rear seat bottom and bolts.
2. Open the seat bottom closeout.
3. Remove the headrest stowage guides (2).
4. Remove the seat cushion cover (8).
5. Remove the seat cushion (7) and disconnect the heater element.
Installation Procedure, Left Side
1. Install the seat cushion (7) and connect the heater element.
2. Install the seat cushion cover (8).
3. Install the headrest stowage guides (2).
4. Close the seat bottom closeout and attach to hook and loop fasteners.
5. Install the rear seat bottom and bolts.
Rear Seat Cushion Cover and Pad Replacement (Utility)
Rear Seat Cushion Cover and Pad Replacement (Utility)
Removal Procedure
1. Remove the rear passenger seat from the vehicle.
2. Remove the rear passenger seat riser.