Escalade V8-5.7L VIN R (2000)
2. Remove the window glass weatherstrip.
3. Remove the front glass run channel top bolt.
4. Remove the front glass run channel from the door.
Installation Procedure
1. Install the front glass run channel to the door.
2. Install the front glass run channel top bolt finger tight.
Do not tighten the bolt.
3. Install the window glass weatherstrip.
4. Install the window.
Notice: Refer to Fastener Notice in Service Precautions.
5. Tighten the window front channel top bolt.
Tighten the window front channel top bolt to 2 N.m (18 lb in).
Door Window Weatherstrip
Rear Side Door Window Weatherstrip Replacement
Removal Procedure
1. Remove the window.
2. Pull the weatherstrip from the following locations:
