Escalade V8-5.7L VIN R (2000)
Rocker Arm Assembly: Service and Repair
Removal Procedure
1. Remove the valve rocker arm cover. Refer to Valve Rocker Arm Cover Replacement.
Important: Store used components in order so that they can be reassembled in the same location.
2. Remove the valve rocker arm nut (1).
-
If only the valve pushrod is being replaced, back the valve rocker arm nut off until the valve rocker arm can rotate away from the valve
pushrod.
-
Then remove the valve pushrod.
3. Remove the valve rocker arm with the valve rocker arm ball.
4. Remove the valve pushrod.
5. Clean and inspect all parts. Refer to Valve Rocker Arm and Push Rods Clean and Inspect.
Installation Procedure